CLBCX - FIBERGLASS INSULATION, KRAFT FACED INSULATION, FOIL FACED IN
- MSDS: CLBCX
- Manufacturer: OWENS CORNING WORLD HEADQUARTERS
- Product Name: FIBERGLASS INSULATION, KRAFT FACED INSULATION, FOIL FACED IN
- National Stock Number: 5640-00-542-3449
Product Identification
Product ID:FIBERGLASS INSULATION, KRAFT FACED INSULATION, FOIL FACED IN
MSDS Date:09/30/1985
FSC:5640
NIIN:00-542-3449
Status Code:A
MSDS Number: CLBCX
Responsible Party
TOLEDO, OH 43659
US
Emergency Phone: 0000000000
Info Phone: 419-248-8234
Cage: 45255
Contractor
Telephone: 419-248-8234
Cage: 45255
Ingredients
FIBERGLASS
CAS: 65997-17-3
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MECHANICAL IRRITATION OF
THE MOUTH, NOSE AND THROAT. SKIN CONTACT: TRANSIENT MECHANICAL
IRRITATION. EYE CONTACT: DIRECT CONTACT WILL CAUSE MECHANICAL
IRRITATION. INGESTION: UNLIKELY TO OC CUR.
Effects of Overexposure:MANY STUDIES HAVE BEEN CONDUCTED TO DETERMINE
THE POTENTIAL LONG TERM EFFECTS OF FIBROUS GLASS INHALATION. IN MAN
EPIDEMIOLOGY STUDIES OF WORKERS EMPLOYED FOR UP TO 40 YEARS IN
FIBROUS GLASS MANUFACTU RING DO NOT SHOW ANY CONSISTENT EVIDENCE OF
PULMONARY DIESEASE, EIGTHER MALIGNANT OR NONMALIGNANT. STUDIES IN
ANIMALS USING THE NATURAL ROUTE EXPOSURE HAVE NOT SHOWN EVIDENCE OF
A CARCINOGENIC EFFECT. ARTIFICIAL IMPLANTATION OF LARGE QUANITIES
OF VERY FINE GLASS FIBERS IN THE CHEST OR ABDOMINAL CAVITIES OF
LABORATORY ANIMALS HAS CAUSED CANCER. SEE MSDS FOR DETAILS.
Medical Cond Aggravated by Exposure:ANY CONDITION GENERALLY AGGRAVATED
BY MECHANICAL IRRITANTS IN AIR OR ON SKIN.
First Aid
First Aid:INHALATION: VINYL FACED PRODUCTS IN FIRE CONDITIONS
ADMINISTER OXYGEN CONSULT PHYSICIAN. SKIN: WASH WITH SOAP AND
RUNNING WATER. EYES: FLUSH WITH RUNNING WATER FOR AT LEAST 15
MINITUES.
Fire Fighting
Extinguishing Media:WATER, FOAM, DRY CHEMICAL
Unusual Fire/Explosion Hazard:THE FACING ON KRAFT PAPER AND FOIL FACED
PRODUCTS WILL BURN AND SHOULD NOT BE LEFT EXPOSED. SPECIAL CARE
SHOULD BE TAKEN WHEN WORKING CLOSE TO THE FACING WITH AN OPEN
FLAME. VINYL FACED PRODUCTS IN FI RE CONDITIONS MAY GIVE OFF
HYDROGEN CHLORIDE A HIGHLY IRRITATING AND TOXIC GAS. EVACUATE THE
BUILDING IMMEDIATELY.
Handling
Handling and Storage Precautions:INSULATION SHOULD BE STORED IN A DRY
PLACE. FACED MATERIAL SHOULD BE STORED WELL AWAY FROM SOURCES OF
IGNITION.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:AMBIENT
Protective Gloves:GLOVES
Eye Protection:SAFTEY GLASSES
Other Protective Equipment:LONG SLEEVED, LOOSE FITTING CLOTHING, LONG
PANTS. A CAP MAY BE USEFUL WHEN HANDLING MATERIAL OVERHEAD.
Work Hygienic Practices:SHOWER AT END OF WORK DAY. WASH WORK CLOTHES
SEPERATELY AND WIPE OUT WASHER AT END OF CYCLE.
Supplemental Safety and Health
Chemical Properties
Solubility in Water:INSOLUABLE
Appearance and Odor:PINK YELLOW TAN OR BLACK INSULATION MAY HAVE FAINT
RESIN ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS. THE PRIMARY METHOD OF DISPOSAL IS IN A MUNICIPAL
OR INDUSTRIAL LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.